Conformity Assessment under the Drinking Water Directive: What Manufacturers Need to Prepare

From Regulatory Requirements to Product Conformity

The implementation of Article 11 of Directive (EU) 2020/2184 establishes a harmonised European framework for materials and products intended to come into contact with water intended for human consumption. Within this framework, conformity assessment represents a key step in demonstrating that products placed on the European market meet the applicable regulatory requirements.

For manufacturers, the transition to the harmonised framework requires more than identifying whether the substances used in a material are included in the European Positive List. Product composition, testing requirements, technical documentation and the applicable conformity assessment procedure must be considered together.

Understanding how these elements interact is therefore important for manufacturers preparing products for assessment under the new European framework.

The Role of Conformity Assessment under Article 11

Article 11 of Directive (EU) 2020/2184 establishes specific minimum hygiene requirements for materials that come into contact with water intended for human consumption.

The harmonised framework is intended to ensure that such materials do not, directly or indirectly:

  • compromise the protection of human health;
  • adversely affect the colour, odour or taste of the water;
  • enhance microbial growth;
  • release contaminants into the water at levels higher than necessary in view of the intended purpose of the material.

Conformity assessment provides the mechanism through which compliance with the applicable requirements can be evaluated and documented before products are placed on the market.

This process forms part of the broader regulatory system established under Article 11, which includes the European Positive List, harmonised testing and acceptance methodologies, requirements relating to the declaration of conformity and the applicable conformity assessment procedures.

What Manufacturers Need to Consider

Preparing for conformity assessment begins with a clear understanding of the product and the materials used in its manufacturing process.

Manufacturers need to identify the materials and relevant constituents associated with the product and determine which regulatory requirements apply. This information provides the basis for subsequent assessment activities.

The process may involve several interconnected elements:

  • identification and characterisation of the product and its intended use;
  • identification of materials and relevant constituents;
  • verification of substances against the applicable European Positive List;
  • determination of applicable testing and acceptance requirements;
  • preparation and maintenance of supporting technical documentation;
  • interaction with laboratories and conformity assessment bodies, where required;
  • preparation of the information necessary to demonstrate conformity.

Information relating to composition may influence testing requirements, while test results and assessment outcomes contribute to the documentation supporting conformity. Manufacturers should therefore consider these activities as components of a single regulatory process.

Material Composition and the European Positive List

The European Positive List central to the assessment of materials intended to come into contact with drinking water.

Manufacturers need sufficient information concerning the composition of the materials used in their products to determine whether relevant starting substances, compositions or constituents are covered by the applicable Positive List and under which conditions they may be used.

This can require cooperation throughout the supply chain. A manufacturer of a finished product may depend on information supplied by raw material manufacturers, formulators or other upstream suppliers.

The availability and quality of composition information can consequently affect the ability to determine the applicable regulatory requirements and prepare the product for conformity assessment. Where relevant substances are subject to specific conditions or restrictions, these must also be considered when evaluating the material.

The European Positive List should therefore be considered as one component of the broader conformity assessment process rather than as an isolated regulatory check.

Determining the Applicable Testing Requirements

Once the product, materials and relevant constituents have been identified, the applicable testing requirements must be determined.

Testing under the harmonised European framework is intended to assess whether materials and products meet the hygiene requirements established under Directive (EU) 2020/2184. Depending on the material and product concerned, the assessment may involve different testing and acceptance methodologies.

The testing strategy must therefore reflect the characteristics of the product, its materials, intended use and the regulatory requirements applicable to them.

Early coordination with laboratories and conformity assessment bodies can help determine the appropriate assessment approach before testing begins and ensure that the generated data correspond to the requirements applicable to the product.

Test reports, information concerning samples and materials, assessment conditions and other supporting records may subsequently form part of the technical evidence used to demonstrate conformity.

The technical aspects of testing and migration assessment will be examined separately in a dedicated DWD-EUPL article.

Technical Documentation as Part of the Assessment Process

Technical documentation provides the evidence supporting the conformity assessment of a product.

For manufacturers, this means establishing a structured documentation process capable of bringing together the information necessary to describe the product, its materials, the applicable regulatory requirements and the evidence demonstrating conformity.

Depending on the product and the applicable assessment procedure, relevant documentation may include information concerning:

  • product identification and intended use;
  • materials and components;
  • relevant composition information;
  • applicable European Positive List entries and restrictions;
  • testing and assessment performed;
  • laboratory reports and supporting data;
  • information obtained from suppliers;
  • records supporting the conformity assessment;
  • documentation associated with the declaration of conformity.

The objective is not simply to accumulate documents. The technical file should provide a coherent regulatory record demonstrating how the applicable requirements have been identified and addressed.

Document control is equally important. Changes to materials, formulations, suppliers or manufacturing conditions may need to be evaluated to determine whether they affect the existing conformity assessment or supporting evidence.

Working with Laboratories and Conformity Assessment Bodies

Manufacturers are not the only stakeholders involved in conformity assessment.

Laboratories provide the technical capability required to perform applicable testing, while conformity assessment bodies perform the activities assigned to them under the relevant assessment procedures.

Effective interaction between these parties depends on the availability of accurate information concerning the product and its materials. Manufacturers should therefore be prepared to provide the information necessary to define the scope of the assessment and support the relevant testing and conformity assessment activities.

Early dialogue can also help identify information gaps before the formal assessment process advances. Missing composition information, unclear product categorisation or insufficient supporting documentation may affect the ability to determine the appropriate testing and assessment requirements.

The Declaration of Conformity

Once conformity has been demonstrated through the applicable conformity assessment procedure, the manufacturer or its authorised representative must draw up an EU Declaration of Conformity

The declaration of conformity represents the formal link between the assessment performed and the manufacturer’s demonstration that the product complies with the relevant requirements. It should therefore be viewed as the outcome of the compliance process rather than as an isolated administrative document.

The information supporting the declaration must be consistent with the product assessed, the applicable regulatory requirements and the underlying technical documentation.

Where changes are made to the product or its materials, the potential impact on the existing assessment and declaration should also be considered.

Preparing for Conformity Assessment

Preparation can begin before a product formally enters the conformity assessment process.

A structured internal review can help manufacturers identify areas requiring additional information or coordination. This may include reviewing product portfolios, mapping materials and suppliers, collecting composition information and identifying products for which further assessment may be required.

Manufacturers may also need to determine whether existing data generated under national approval systems can contribute to the new assessment process and where additional evidence may be necessary under the harmonised European framework.

Particular attention should be given to products for which composition information is incomplete or where manufacturers depend on confidential information held by upstream suppliers. These situations may require early coordination to establish how the necessary regulatory information can be made available for assessment.

This preparatory review can help identify documentation gaps and dependencies within the supply chain before assessment activities progress.

Conformity Assessment as an Ongoing Regulatory Process

Conformity must be maintained throughout the product’s lifecycle, not just verified at the initial assessment.Changes affecting the product, its materials or the applicable regulatory framework may require manufacturers to review the basis on which conformity was demonstrated. Regulatory developments affecting the European Positive List, testing methodologies or other elements of the Article 11 framework may also need to be monitored.

This is particularly relevant during the transition from national approval frameworks towards common European requirements.

Maintaining traceability between product composition, assessment evidence and regulatory documentation can help manufacturers determine whether existing assessments remain applicable when relevant changes occur.

Products for which an EU Declaration of Conformity has been issued must also bear the harmonised drinking-water suitability marking established under Regulation (EU) 2024/371.

The Role of the DWD-EUPL Initiative

The DWD-EUPL Initiative supports stakeholders in following and addressing the regulatory requirements associated with Directive (EU) 2020/2184 and the European Positive List.

In the context of conformity assessment, access to structured regulatory information is particularly relevant because manufacturers must consider developments affecting substances, materials, testing requirements and the broader implementation of Article 11.

Through technical publications, regulatory updates and stakeholder cooperation, DWD-EUPL provides a regulatory information resource for manufacturers, laboratories, conformity assessment bodies and other economic operators involved in the transition to the harmonised European framework.

The initiative also facilitates cooperation relating to substances included in the European Positive Lists, supporting stakeholders in addressing regulatory information requirements that may affect materials used in products intended to come into contact with drinking water.

Frequently Asked Questions

What is conformity assessment under the Drinking Water Directive?

Conformity assessment is the process through which compliance of products with the applicable requirements of the harmonised European framework can be evaluated and documented. It forms part of the implementation of Article 11 of Directive (EU) 2020/2184 for materials and products intended to come into contact with drinking water.

Is inclusion of a substance in the European Positive Lists sufficient to demonstrate product conformity?

No. The European Positive Lists are an important component of the regulatory framework, but product conformity must be considered together with other applicable requirements. Depending on the product and materials concerned, these may include testing and acceptance requirements, technical documentation and the applicable conformity assessment procedure.

What information should manufacturers prepare for conformity assessment?

Manufacturers should establish accurate information concerning the product, its intended use, materials and relevant constituents. Supporting information may also include applicable European Positive List entries, testing and assessment results, supplier information and other documentation necessary to demonstrate conformity.

What role do laboratories and conformity assessment bodies have?

Laboratories perform the testing required under the applicable assessment methodology, while conformity assessment bodies carry out the activities assigned to them under the relevant conformity assessment procedures. Manufacturers may therefore need to coordinate with both as part of the assessment process.

Can existing national approval data be used under the harmonised European framework?

Existing information may be relevant when preparing for the transition, but its applicability must be assessed against the requirements of the harmonised European framework. Manufacturers should determine whether existing evidence is sufficient for the applicable assessment or whether additional information or testing is required.

Does conformity assessment need to be reviewed when a product changes?

Changes to materials, formulations, suppliers, manufacturing conditions or other relevant product characteristics may need to be evaluated to determine whether they affect the existing conformity assessment, supporting technical documentation or declaration of conformity.

Regulatory Outlook

The implementation of Article 11 represents a significant transition from national approaches towards harmonised European requirements for materials and products intended to come into contact with drinking water.

For manufacturers, conformity assessment connects several components of this framework, including material composition, the European Positive Lists, testing and acceptance requirements, technical documentation and the declaration of conformity.

As implementation progresses, manufacturers, laboratories, conformity assessment bodies and other economic operators will need to monitor applicable regulatory requirements and ensure that assessment processes and supporting documentation remain consistent with the requirements applicable to the products and materials concerned.

 

AI-assisted content, reviewed and edited by the DWD-EUPL Initiative.